🌬️ Cool down your tech game with GDSTIME!
The GDSTIME 120mm Fan is a high-performance cooling solution designed for various devices, including PSUs, GPUs, and servers. With a maximum speed of 3000 RPM and an impressive airflow capacity of 114 CFM, this fan ensures optimal cooling while maintaining a low noise level of 37 dBA. Built with durable PBT plastic and dual ball bearings, it boasts a lifespan of up to 50,000 hours, making it a reliable choice for any workstation or cabinet.
| Compatible Devices | PSU, Server, Refrigerator |
| Noise Level | 37 dB |
| Max Rotational Speed | 3000 RPM |
| Air Flow Capacity | 114 Cubic Feet Per Minute |
| Wattage | 4.2 watts |
| Cooling Method | Air |
| Power Connector Type | 2-Pin |
| Voltage | 12 Volts |
| Material | PBT Plastic |
| Item Dimensions L x W x H | 12L x 2.5W x 1.2H centimetres |
A**R
120mm 12v Fan
Installed in a spray booth, works well, good airflow, a bit noisy but does the job, reasonable price.
S**S
Powerful with large airflow.
120x120x38mm 24 volt fan. This fan runs up slowly just like a jet engine. The fan is fairly noisy, but this is due to the large amount of air shifted. I would not suggest this for a living or bed room PC, but elsewhere this fan would be excellent. It provides a great deal of cooling.
B**N
louder than expected but top tier airflow
Solid build, louder than 46db for sure, but run it at half speed and it's acceptable for a high airflow fan, best to have this one in an enclosure or at least use rubber o-rings to dampen some of the noise
R**.
Exactly what it says in the tin
Worked a treat for my "tomato" plant
G**D
Incorrect cable soldering
There was a huge blob of solder (5mm across) covering all the contacts shorting them all out.Black wire was soldered to this, red wire was stuck on with hot melt glue - not connected to anything fortunately otherwise it would short the power supply (because of large blob of solder).Removed hot melt glue and blob of solder.Re-soldered wires and now works fine.
P**T
DOA, poor quality
Used it to replace one in a home ice machine. Ran Really slow and intermittently just stopped. Nearly overheated the machine again. Bought a slightly better one and the machine is better than it’s even been. Hopefully it was a one off but not taking the risk. Returned
T**F
Too good
The fans are a bit to good for the project I'm using them for they sertanly move a lot of air will need to use a speed control for my project would recommend
D**S
Superb product
Everything superb 👌
Trustpilot
2 weeks ago
2 months ago
