Cutting Edge Performance Awaits! 🔥
The XtremepowerUS 3200W Electric Cutter is a powerful and lightweight circular saw designed for professional-grade cutting of various stone materials. With a 16" blade, advanced dust extraction, and enhanced safety features, this saw maximizes productivity while ensuring a clean and safe work environment.
Manufacturer | XtremepowerUS |
Part number | 50130 |
Item Weight | 18.1 Kilograms |
Product Dimensions | 81.28 x 21.59 x 46.99 cm; 18.14 kg |
Batteries | 1 Unknown batteries required. |
Item model number | 50130 |
Color | Black |
Style | 3200W 16" CutOff Saw |
Material | ABS Plastic, Metal, Steel |
Power source type | Corded Electric |
Voltage | 115 Volts |
Wattage | 3200 watts |
Amperage Capacity | 15 Amps |
Item Package Quantity | 1 |
Handle Material | Plastic |
Blade Length | 16 Inches |
Speed | 4700 RPM |
Special Features | Brushless |
Included components | Manual, Water line attachment |
Batteries Included? | No |
Batteries Required? | No |
D**!
Excellent product
Cuts easily, 100% recommended
T**R
UPDATE
When fully adjusting the depth plate to cut maximum depth the water line, supply to both sides of blade cover, interfere depth guide adjustment arm and the blade guard cover is forced to tilt in a way that brings the bolt (attaching the depth guide and adjustment arm) get too close to the blade; that design fault could eventually ruin the waterline and worse that could happen is if the blade and mentioned bolt rub together while saw is in use. If the bolt is reversed in installation insertion entry, in contrary to its delivered pre-assembled state, the bolt would be farther away ftom the blade and should be safer. The blade can only extend 5 and a half inches from the blade guide. The blade is hard to install and harder to remove due to lack of enough clearance. The manual that was delivered with the saw is basically useless; it lacks clear pictures, assembly illustration, and it mentions lots of nonsense. No way to be sure how to ptoperly install the blade including the washers. I purchased a blade from the same company, both saw and blade from same manufacturer. Blade shows indication arrows, blade arrow turn indicator on one side is the complete opposite of the other side in relation to the blade teeth aggresiveness design. Will update after checking a replacement from Amazon.UPDATE: I also returned the replacement because of lack of availability of the missing parts and Amazon refused to try another replacement. Replacement arrived after 2 weeks, with manufacturer's box, no outer Amazon box. Bolts to attach the depth of cut guide plate are missing. Very poorly located packaging of some of the parts to be assembled; a slightly torn seam taping appeared to also caused a small tear of the small plastic bag that contained some smaller parts. The small plastic bag is positioned immediately just inside the taped middle seam of the manufacture's box.Note: I was trying to hold the initial purchase until I received the replacement but I was notified that the replacement will not be sent until it has received back the defective saw. I could have tried and get the same saw for a third time with 20% increased cost but I opted for another brand for quicker delivery.
P**R
Does the job
I used this concrete saw to cut out access to my pool skimmers. Worked great .
J**A
Almost Great
Bought this to cut some 4” thick concrete. I had read some earlier reviews complaining about a few design oversights with the water feed as far as not accepting a standard garden hose and the feed hose not being firmly attached. They must have heard this feedback and changed up the design, because it now accepts a standard garden hose attachment and has a piece of Velcro to secure it.My only complaint is the rubber debris guard behind the blade. If you have to pull the saw toward you, it often gets caught under the wheels. This may be the reason a few people complained about uneven cuts.The included blade was OK, about as good as could be expected for an included blade. I made eight 3’ cuts overall; It cut very well at first, but by the last 2-3 it was clear it was pretty worn.Overall, great value for the price.
D**Y
powerful little beast
Bought this 6-8 months ago, finally put it to use today. I was a little scared to use the water function, but totally necessary I my sitch. It worked well, cut though 4 inch deep limestone super quick, and I made 4 - 4” deep cuts 12” long each through a solid block of marble. Blew the 20 amp fuse each cut through the marble, but it did the job I needed!! First cut was a little off but the rest were fine! It’s was me, not the machine.So yeah it’s worth the cost, it’s a little beast!The instruction manual needs a little help, and the last couple pages seemed to be talking about a totally different machine, so beware there may be a little problem solving on your part. The video of not finding the blade lock to put the blade on, use the wrench to hold the nut, the Allen key takes the bolt out of the center.And I will probably get a better blade,
Trustpilot
4 days ago
3 days ago