🚀 Elevate Your Ride with Power Stop Performance!
The Power Stop KC1905-36 Z36 Truck & Tow Brake Kit is engineered for 1999-2004 Ford Excursion and F-Series Super Duty 4WD vehicles. Featuring advanced carbon-fiber ceramic brake pads, low dust performance, and rust-resistant components, this kit ensures optimal braking power and longevity, making it the perfect upgrade for heavy-duty truck enthusiasts.
Brand | Power Stop |
Vehicle Service Type | Truck |
Orientation | Front |
Global Trade Identification Number | 00792088809964 |
OEM Part Number | KC1905-36 |
Manufacturer | Power Stop |
UPC | 792088809964 |
Model | KC1905-36 |
Item Weight | 105.7 pounds |
Product Dimensions | 14 x 14 x 12 inches |
Country of Origin | China |
Item model number | KC1905-36 |
Exterior | Zinc |
Manufacturer Part Number | KC1905-36 |
Position | Front |
M**N
Best brake kits around.
Power Stop brakes are my go to brand for all my vehicles. These were purchased for my '01 Excursion that I already had installed on the rear. I also have them on my '14 Shelby GT500 and my '03 Mercury Marauder. The only vehicle I don't have Power Stop brakes on is my '94 Ford Lightning only because they do not offer them for it. Power Stop provides a smooth effortless stop!
R**9
Powerstop brakes to the rescue again!
I buy only Powerstop brakes because the quality, install and performance are constantly great! These were put on a Ford Excursion and wow! What a difference! This kit took out the last of the " death wobble" and the truck stops straight as an arrow. Good price, arrived on time, and straight forward install!! Definitely world but from seller again!
D**C
Missing components
Shipment contained no brake shoes as it was supposed to
B**N
Great performance and value
I just installed this rotor/pad kit on my 2003 Ford Excursion. All parts were correct/present and fit as expected - no issues whatsoever. I followed the break-in procedure to-the-T and now the truck stops on a dime! Night-and-day difference over stock! I'd highly recommend these rotors and pads to anyone and, in comparison to the cost of stock OEM/NAPA parts, this Power Stop kit is a great buy and stops way better.
L**.
Great upgrade
The front right caliper failed on my stock 2001 f250 front brakes and started leaking fluid. Luckilly i was right by a brake masters. They looked after my truck for a week and had this kit installed within a couple hors of dropping off. Was easy on the brakes for the first 200 miles and have since loaded my truck with hay and chicken feed and with this new kit braking performance is much improved.
S**E
Nice brakes, easy install
Very easy to install, helps if you have a brake bleeder (makes it easier and faster).The driver set the box in front of my screen door and I couldn't open it I had to go around the house to pick it up and put in the garage, second the box and subsequent boxes were tore open and smashed, brake pads and parts were strewn about inside.This didnt effect the install but would expect better.
B**D
Great brakes!
Thought I would try this power stop rotor and pad kit on the front of a 2002 F250 Ford diesel 4x4 for pulling a 13,500 lb 5th wheel camper. Only put about 1400 mls on them so far and WOW, did a excellent job, next to no brake dust, no rust and broke in very easily.
J**G
Beware the Powerstop Brake System!
Warranty is 3,000 miles and 90 days. You are screwed if it fails.I have the Powerstop brakes on my two F350s, and was originally quite satisfied.However, I have now had a couple of problems and Do Not Recommend them!First, I had a rotor damaged. They will not sell single rotors, but only the pair! The system was only a year old, but I was forced to buy a pair of rotors when one was damaged in an accident.Second, I now have the right front brake caliper not releasing properly. I opened the bleeder, no release. I opened the brake line screw, no release. Yes, it released when I pried on it.[QUOTE="Email from Powerstop Customer Service"] You mentioned that you opened the bleeder screw and still you had no release, where you able to open the bleeder and then push in the caliper piston? If so, and the piston did not go inside its bore, the caliper would need to be replaced. Power Stop does not offer rebuild kits for calipers, all of our re-manufacturing of the calipers are done in house.[/QUOTE]So, basically NO Customer service at all! No support!
J**T
Super
Belles pièces, bien faite et fitt direct comme ceux d’origine
S**X
Don't ever buy regular brakes from parts stores
What a great product. For same price as regular discs and pads, you get premium products. My big truck breaks quietly, evenly and smoothly. Most of all, it breaks fast with zero issues.Great product!
R**D
Made in China, junk.
Not worth the headache. Arrived two weeks late and once installed I found the right side rotor wasn’t true. It had a high spot and was about 1/8” out. Ended up buying new rotors from my local parts store and now dealing with a return. These brakes are manufactured in China buyer beware, time will tell on the calliper. Not what I I expected from heavy duty tow rated.
B**6
Awesome kit for my F-350
Put these on my 2004 F-350. Great feel, and the kit was totally complete. Time will tell if they are as robust as they claim.
Trustpilot
5 days ago
2 weeks ago