Wall Mount Mirror for Bathroom, Brushed Black Metal Framed Rounded Corner Rectangular Vanity Mirror (24" x 36", Black)

I love this mirror. The size is perfect for our bathroom. Great value for the money. Love the black frame. It is easy to install and the stability on the wall is great. There is no distortion in the mirror looks great from all angles.

Very nice mirror. Used in my bathroom. Nice quality and cheaper than in the store.

The first mirror I received was shattered but the replacement was perfect.

Installation can be a challenge. There are two keyholes on the back that slide over two screws mounted perfectly on your wall. It would be helpful if they had told me these facts:The outside measure of the mirror is 30 1/16 x 20 1/8. The frame of the mirror extends 5/16 above the backboard, and the keyhole is recessed into the backboard 1/8” but has a “bubble” on it to accept the screw head. So if you let the screw stick out of the wall by 7/16” it will fit into the keyhole and the mirror will hang. If the screw doesn’t stick out enough, it won’t clear the frame to reach the keyhole.The two keyholes are, for horizontal hanging, 20 1/8” center-to-center, which means even if you find a stud, you will still need a drywall anchor for the second hole (as studs are 16” apart). For vertical hanging, the keyholes are 10 ½ “ apart.The mirror comes with some drywall anchors and screws but they didn’t look adequate. The mirror weighs 10 lbs and to allow for stress on it during cleaning the glass, allow 15 lbs. So I bought a set of #6 drywall anchors and screws. I measured on the wall (with a level) where the holes should go. Bottom of the frame to the horizontal mounts is 15 ¼”.Drill pilot holes first with a 3/16” bit in case you’re lucky and hit a stud. I did. On the other hole, the pilot hole is about 5/16” to accept the anchor. When you put in your screws, you have to estimate the head extension 7/16 by eye. You can always screw in more, but you can’t screw out without ruining the anchor.Make the same keyhole measurements on the reflecting side of the mirror and mark the keyhole locations on the glass with lipstick or Vaseline. That helps you align the screws with the keyholes, a procedure that is otherwise blind. I put a few 3M sticky pads at the bottom of the mirror to fill the space between the frame and the backboard so it wouldn’t rattle.The mirror looks really classy. It’s a great product at a great price. But you do need a bit of patience to install it. I should have hired someone. Took me all afternoon.

I used three of these mirrors over my upgraded vanity to replace the old solid mirror. The brushed nickel frames match well with sink fixtures and the rest of the bathroom hardware . I am very pleased with the result

Mirror is solid. Good quality. Arrived just as described. Works great in my bathroom.

Yes, the mirrors look nice, but this is THE WORST product design ever released!1) As soon as the frames touch the wall even the LEAST bit, they will leave black marks. The first mirror we hung almost ruined the freshly painted wall.2) The mounting brackets in the back are HORRIBLE!! For starters, there's NO WAY to adjust the mirrors - not even a tiny bit. Plus, it's really hard to actually hand the mirrors, as it's extremely difficult to hit the brackets.There are 1000's mirrors out there that look the same - do yourself a favor and find another one that hopefully will be a lot easier to install.

Love this mirror in the bathroom very sturdy on the wall!

The mirror is heavy and sturdy. Easy to clean

Started eroding just after return window. Bought on Sep 1 and return window was until Oct 2. Observe silver backing being compromised asshown in the photo at 35 days. Basically loss to customer 😔