Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes - Pocket Screw Kit for Kreg Joinery - Sturdy Wood Screws - Pocket-Hole Screws Perfect for Beginners - Set Screws Assortment Kit

Here is exactly what is in the box:NOTE: The product description says the screws come "in five sizes." That's a bit misleading; it sounds like you are getting five different lengths. You are actually getting only THREE lengths (for three sizes of stock); two of the lengths come in both course and fine threads. So you get five varieties, but only three lengths.Course threads are for use in soft woods (pine - including hemlock, MDF, particleboard, etc). Fine threads are for hardwood (maple, oak, etc).For 3/4" stock, 1.25" long screws, bright finish: - 150# SML-F125, Maxi-Loc head #7 shank, fine threads, for 3/4" hard stock - 150# SML-C125, Maxi-Loc head #8 shank, course threads, for 3/4" soft stockFor 1/2" stock, 1" long screws, bright finish: - 150# SPS-F1, Pan Head, #6 shank, fine threads, for 1/2" hard stock - 150# SPS-C1, Pan Head, #7 shank, course threads, for 1/2" soft stockFor 1.5" ("two-by") stock, 2.5" long screws, Blue-Kote finish: - 75# SML-C250B, Maxi-Loc head, #8 shank, course threads, for 1.5" soft stockMaxi-Loc heads have a molded-in "washer" which increases the surface area of the head compared to the Pan Head variety. All screws use the same size square-bit driver."Bright" finish means electroplate-galvanized zinc. This finish won't stand up to long term exposure to adverse weather. Blue-Kote finish (used only in the screws for 1.5" stock) is weather resistant. As the name suggests, these screws are blue.The case is sturdy and should last for years, and it REALLY adds a lot of value to the kit. The locking tabs are nice and tight - if you drop the case it is unlikely to pop open and mix up your screws on the floor. My only complaint is that the case does not have a provision to hold the square-drive bit. A "bit compartment" would make it a little more useful (and an included bit even more so - an extra bit would be a nice bit of insurance).Kreg OEM screws are the highest quality. You should always set your drill clutch to a reasonable torque (not much more than it needs to be for your stock), but you are unlikely to twist the head off of these screws or strip out the square socket if your clutch is too tight.I'll be buying a bunch more fine screws for 3/4" hard stock, which is my most common requirement. The other screws I will need much less frequently, but when you need an oddball screw, it's a bummer to not have it. The set makes no attempt to include screws for REALLY oddball stock sizes (how many people really use 1" stock?)This is a good and generous assortment of high-quality screws for the most common stock sizes used in cabinet-style joinery. An excellent value.(if you find my review helpful, please "like" it. thanks!)

After you buy a Kreg drill jig kit, the next thing you will need is some of the fasteners. But which ones will you need? If you are just getting started with Kreg, I recommend this kit. It has a great assortment of all of the screws that you will need around the house or shop. Once you start getting the feel for the Kreg tool and what it is capable of you will find all sort of projects and repairs. It's nice to have most of the common fasteners in one place. These will work on 1/2" and 3/4" thick wood such as cabinets and drawers. The larger screws will get you going on working with 2x4's. I've built small projects all the way up to parts of my shed with the Kreg screws.Larger quantities of the Kreg screws can be purchased for bigger projects or to refill this nice box. The hinges and clasps are sturdy so it's nice to hold on to. This is another quality Kreg product. Highly recommend it for the beginner Kreg user or seasoned pro!

I highly recommend Kreg joinery. If you do not know what that is, then watch some of the Kreg videos on a popular video website. This kit provides a nice assortment of screws for use with the Kreg pocket screw system. With this kit, you get an assortment of five Kreg screws (in a handy plastic carrying case), including: 150 1 inch fine; 150 1-1/4 inch fine; 150 1 inch coarse; 150 1-1/4 inch course; and 75 2-1/2 inch coarse.The "Fine" Kreg screws are for hardwoods as they reduce the chance of splitting. Use "Fine" screws in woods such as ash, oak, maple, birch, ash, walnut, cherry, hickory, or mahogany. The "Coarse" Kreg screws are for softwoods and composite materials such as MDF and plywood. Use "Coarse" screws in woods such as pine, cedar, poplar, plywood, basswood, melamine, or particle board.Material Thickness; Screw Length; Kreg Jig Setting1/2" (12 mm); 1" (25 mm); 1/2" Marking5/8" (16 mm); 1" (25 mm); 5/8" Marking3/4" (19 mm); 1-1/4" (32 mm); 3/4" Marking1-1/2" (38 mm); 2-1/2" (64 mm); 1-1/2" MarkingThe Kreg pocket screw jig entirely changed the way I join wood. I no longer use a dado set or a router, I simply set up the jig, drill the pocket holes, and join the wood with the proper Kreg pocket screw. I own the old Kreg K3MS K3 Master Pocket Hole Jig System. The new model is the:  Kreg K4MS Jig Master System . If you don't want to spend that much money, try either the  Kreg Jig K4 Pocket Hole System  or the  Kreg R3 Jr. Pocket Hole Jig System . The Jig Master is best if you wish to make a large number of consistent pocket screw holes (for example, if you are building book shelves or kitchen cabinets).To drive these screws, you will need a power drill equipped with a "square drive" bit. A bit may come with your kit. If not (or if you want a spare) you can order the bit here:  Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems . To drill out the pocket-screw holes, you will need the Kreg pocket-screw drill bit. A drill bit should come with the Kreg kit. If not (or if you want a spare), you can order one here:  Kreg KJD Replacement Twist Step Drill Bit for Kreg Manual-Pocket Hole Systems .I recommend using Kreg-brand pocket screws. Considering the expense of wood and value of your free time, it does not make much sense to save just a few pennies by purchasing cheaper, generic screws.Please note: For outdoor projects, you need Kreg "Blue Kote" screws.Update (02/26/14): This was a great little kit when I first started using the Kreg system. Since I typically work only with three-quarter inch hard woods, I now buy (500 count) boxes of 1-1/4 inch fine screws  Kreg SML-F125-500 1-1/4-Inch #7 Fine Pocket Hole Screws with Washer-Head, 500-Pack . However, it is good to have a collection of course screws, as well as shorter and longer screws (for that occasional odd job).

Good addition to my tool supply, very handy and case works well

This set came with 5 different screw sizes. Good screws. Nice to be able to buy a small kit like this and figure out which sizes you will actually use before ordering in quantity.

El producto llego en Perfecto estadoElMaterial de maletín y la calidad de los tornillos sin excelentes.Se los recomiendo mucho

Arrived in perfect condition. Fast delivery. Good quality.

Great assortment but of cos if assortment set, the price must be attractive. Kreg never fails when you wanna do pocket holes...

Good supply or various screws for various projects!