Spyder 5009494 Chevy Silverado 1500 07-13 2500HD/3500HD 07-14 Projector Headlights - LED Halo - LED ( Replaceable LEDs ) - Black - High H1 (Included) - Low H1 (Included)

These lights are working great for me so far. I will reserve the right to change my opinion and update if needed. Based on all the bad reviews, I liked the lights and still wanted to have them on my truck. Because of the reviews, I chose to have them installed at a truck aftermarket specialty shop. I wanted to make sure the hookups were correct and the connections were as tight as they could be. Boy, am I glad I did. They had some of the same issues as everyone is posting...no directions for hookup and lights did not work when initially connected. But they worked through that and all lights work and look great. Now to wait and see how much longevity the H1 halogen bulbs have.UPDATE 28 December, 2015Just like everyone else, the low beam lights went out. Left side after 2 months and right side after 5 months. Real hard to replace the bulbs but bought SilverStar H1 halogen replacements and haven't had a problem since. Except when I hit a deer and the left light got smashed and the left headlight was still working. I have had no problems with the headlight intensity, except with the SilverStar bulbs, they are definitely brighter lights. I think if (or when) a high beam ever goes out, I will have to remove the whole assembly in order to replace because I am not sure I can get my hands down in there that far and also be able to see what I am doing.

Put these on a '13 Silverado. Installation is a snap if you watch the video. Will definitely reduce time spent greatly. Make sure you buy 8 i repeat 8 18/22ga. quick connects for the led/halo wiring. If you want the led/halo to come on with the parking lights find the black ground that comes from your parking light bulbs and connect - to that. The brown wire is the positive for the parking lights(been brown in Chev's for years) if I hadn't known that it would have taken a lot longer chasing out the correct polarity with a meter. Also, make sure that the led/halos all come on before you install. Check the pins in the headlight plugs, on mine for the lo-beams they were bent in and it still coupled together and didn't go into the slots to give the light power(thought I had a burnt out bulb). They look great on my truck and light up the road just as well if not a little better than my OEM lights.

the lights look great installed. they light up the road at night. they seem to be focused a bit higher than the stock lights. the instructions are a bit sparse. go ahead and hit the autoparts store and get a box of quick connects. they really should be included with the install kit. on my truck, I could wire the Halos to either the parking lights or the running lamps. the running lamps on my 07NBS are just low beam headlights. if you wire to the low beam headlights, there is no testing to do as there are only 2 wires to tap. I can see where people have trouble with one of the 4 halos not working. pay attention when you are crimping and you wont have any problems.

Nice set for the money

I bought the Spyder HAlogen LED projector Headlights, they looked good! Came in on time and was pleased....until I wired them up. The Drivers side Halo rings worked, but the PAssenger side did not work. I doubled checked all the wiring I even plugged the Passenger side Headlight into the drivers side to see if it was my truck, but it did not work as expected. So i returned it and they shipped me new ones, they were fast in shipping me new ones! But the same thing happened. The wire in the Headlight must not be connected properly. They said they were going to take thme off the site to double check them, but Im not sure if they have or not.

Didn't like the fact you have to takeight out to adjust on one side. And you have to splice for the added lights it wasn't plug and play

I have had these lights on my truck for a month and a half now and have already replaced the drivers side bulb twice. After reading the reviews I was a little skeptical on getting them. They looked real good so I went ahead and ordered them. I got the lights in when they said they would be here. Install was not as bad as a lot of the reviews have said. They look GREAT on my truck but it is a little aggravating to have to replace the bulbs so much.

Look really good on my truck, had a headlight go out after about 3 days.... It is a pain in the A$$ to change out the bulbs...My suggestion would to be go ahead and swap the bulbs out in the pair with some really good lights and then install so you dont have to take the grill back off to swap a bulb like i did

Bought these lights in mid December 2017, had them installed by a professional first week on January 2018 and bulbs have already gone out on one side. Not impressed at all. Garbage product and stay away!!

Looks awesome

Haven’t with standend the test on Ontario’s cold winter yet depends on how they do my review mite change but so far there great pretty easy to put in and are way brighter then my old lights

4 stars as the adjustment dial is almost impossible to get to with a screw driver to adjust, but it can be done...passenger side of 2012 silverado was especially difficult to get at...some though into adjustment was required for the chev. Other than that they look great!

Projector lights burnt out after a month not impressed. Sent email to spyder to see what can be done. Other than that they look badass will change review depending on there reply.