Replacement Parts Troy Bilt 1901118 Horse Pony Tiller Tines 10802 Tine Set W/Hardware Troy Built
G**N
Fits but are terrible
Wish I had got them sooner, I didn't realize how bad mine was!! Ok well after lots of rain I was finally able to use the bigger tiller with the new tines. To say the are terrible is an under statement!! It leaves ditches not nice smooth ground as it had.
P**E
Not an exact fit for the TroyBilt Horse, Had to modify
As these blades are a universal fit they are not an exact fit. I used the old blade bolted to the new blade as a template. Fortunately I have a heavy duty bench grinder. It took about an hour and a half to modify every blade. They do send plenty of extra nuts and bolts. I used an air impact to disassemble and assemble. Pay attention and make sure the blades are facing the correct direction. I completely put on a set backwards. Oops, had to flip them.
K**T
Poor fit
Machining was off had to grind each times to make them fit
L**M
Make sure they fixed
I did not like them the hole didn’t line up and the Ben wasn’t right neither
B**K
A little grinding where it touches the shaft. Good material and price.
Takes a little grinding my 6 inch bench top grinder to make the fit around the shaft.Remove about 2 inches long and 1/10 inches material. Th screw holes then line up and I used the new screws. There are excess of mounting hardware. The tines looks good and makes the tiller looks great. Worth the money and little elbow grease.
S**E
Overall good (read review)
The bolt patterns lined up but wouldn't sit all the way down on the shaft so it took some grinding on four of them.
M**C
Don't buy cheap
The tines looked to be of good quality. Several had a flat spot th@t looked like a quality control issue Using the nuts and bolts supplied as part of this order. I threw them away. After putting in 10 I noticeD that the lock washer had spread out completely. Taking the nuts off several stripped in place. I had to cut them off. I reused the original 30 year old nuts and bolts.
J**1
Be prepared to work to get them installed.
No directions. Had to wrestle a bit with tines to get right direction and bolt holes. These are not OEM (I knew they wouldn't be). Comes with three hole pattern and took some time to figure out which ones to use. Got it, they are on and been using for last two weeks. With all said and done I would buy again.
Trustpilot
2 months ago
1 day ago