National Hardware N233-247 3219BC Wall/Ceiling Mount Single Pulleys in Zinc, 1-1/2 in.

I took this and welded it to a 1 inch square steel pipe, or tube. It got mounted into the legs of my Rohn 25 tower and a pulley for my Off Center Fed Dipole. I have another pulley at the bottom on a spring to keep tension on the line, so the antenna is now an easy up, and easy down antenna. The pulley stood up well to being welded, the heat didn't hurt it one bit. You can see that there is a pin to take it apart, I didn't take it apart to weld it, but i thought to take it apart to put grease on the pin, it will help keep it running smooth after being out in the sun all year long.

This is a quality made little pulley. I just needed a small pulley to install in an area where it wouldn't necessarily be noticed, but would be helpful to me. This met all my expectations. I installed it under the handrail of an upstairs banister so I could raise and lower a laundry hamper or a pack of water from one floor to the next. Also helps with bringing other small items up and down when you don't wish to make multiple trips. A simple rope was all that was required.

Need to set up a pulley system with mechanical advantage to haul topsoil to upper deck. Two of these and rope, 5 gallon buckets, a few pieces of scrap lumber and an S hook and all was well.

So far so good 😊, happy camper

This was perfect for what I needed to do. Has three holes with which to attach it to anything. It can be side mounted or top mounted. Great little device.

This pulley is exactly what I was looking for. In fact, it is even better than I expected. It's use will be for hoisting bags of groceries up to my entrance door on the outside of a two-story house, eliminating trips up the stairs.

Just your basic cheap block for hanging light weight stuff out of the way with!

I have no doubt it will perform as described. It is well made, rugged, the rugged die cast zinc sheave spins freely. The steel body seems to be galvanized and should give many years of good service. Well pleased nothing negative to comment on.

Hace al rededor de 3 años que compré está pequeña polea, la compré para hacer ejercicio en casa, pero en algunas ocasiones me ha ayudado para cargar cosas del trabajo, es muy práctica solo tienes que ocupar los taquetes correctos en mi caso de 1/4, la verdad no recuerdo si venía con taquetes o los compré aparte, eh cargado pesos de al rededor de 150 kg sin problemas, tiene la ventaja de poderse instalar en paralelo o vertical, en la foto se ve despegado de la pared porque lo estaba quitando precisamente para prestarlo a un amigo

Made in China but no bad. Finishing is a bit rough but it does the work.

Really like these, well made, feel solid and i wouldn't be surprised if they could handle more than their rated weight. The possibility to mount from above or the side really is useful, as is the split pin making maintenance easy. I have three so far on my diy cable machine and they run smoothly under weight. Worth every penny.

If you need a pulley system I really recommend these. Paracord works well with them.

strong well engineered pulley with versatile mounting and pulley removable for ease of rigging.