Extreme 6 Way Balanced HD Digital 1GHz HIGH Performance Coax Cable Splitter - BDS106VF

This is a great product and solved a problem for me. I needed to get the signal from my attic mounted high quality UHF/FM antenna to 5 or 6 spots in my home over a total of 300+ feet of coax. I use a low noise pre-amp to boost the signal but was still having a problem. Most splitters jump from 4-way directly to 8-way with a corresponding loss in signal. Prior to finding this quality Extreme Broadband 6-way splitter I was using a 4-way splitter from the "Big Box" L store that was supposedly their best quality. Even with only 4 outlets it had a insertion loss of -11db at each outlet. I then had to further split one leg with a 2-way splitter and got a degraded signal at the HD receiver on one leg. I searched around and this splitter from Extreme Broadband Engineering only has a -9db insertion loss which is excellent for a splitter of this size. Now I have great signal at every TV and receiver in the house. A+

I split off for 4 tvs and there was no noticable degradation. Only issue was one of the terminals seemed not to function.

I used this to add cable to 2 more rooms in my house. I have cable in all my bedrooms we are usually running 2-3 TVs and cable modem at one time with zero issues! I spent $8 for this $40 for 200ft of Rg6 coax and connections vs Comcast charging 150-200

works great.i used this in my house after having poor cable signal strength. i ran all new rg6 coax to every tv back to this splitter i mounted on a stud in the attic, then one run from that to where the cable comes in on the side of the house.so happy i did, wish i would have done it years ago.

It works better than my last 6 way splitter but it still doesn't solve my problems. I am trying to split the one cable from the pole to 5 tvs and 1 cable modem. The cable modem goes down every hour or so so I had to use a two way splitter ahead of this one.....still not great but as long as I only connect 4 tvs it works most of the time.

Like it

Needed to run a couple extra lines in my house, so the 1 to 3 splitter I had, needed an upgrade. Swapped this in it's place, and I'm good to go.

Very low db rejection for a 6 way splitting