6 Inch Flex Duct Easy-to-Install 5-Feet Fabric Air Duct with 2 Clamps–4 Layer PVC and Aluminum Flexible Duct for HVAC Ventilation

Ok, first though not technically a feature, the packaging was so well designed, that this vent hose was not creased, dented or out of alignment on delivery. The hose is built like a slinky, which helps, but it was in a tight fitting, tall box and then in a plastic sleeve, with the hose clamps slipped over the hose but protected from being torn by them. Nice packing job!#1 The Best A+ No. 1 feature---the ends of the hose are reinforced with thick rings that make installation on the dryer pipe (which is sort of short and jagged) and onto whatever connection you have venting to the outside, incredibly easy. If you can see it in the picture, the reinforced part of the coating is thick enough you can fit the clamp ring over it and still have extra room. The extra thickness gives you room to fit it over the dryer pipe and then get the clamp over all of it, ensuring that the hose won't slip off as you put the dryer back in position. And it doesn’t look like it will start to lose its integrity when it comes time to remove the hose for cleaning. I anticipate the ends of the hose holding up.The reinforced bits are something that should be on every vent hose.Yes, most foil vent hoses have some bit of thickening or little ring at the end, but it’s not as substantial and it’s usually short and the foil tears away from it quite easily. This is a much better design.#2 The Accordion style pleats allow the rings of this hose to compress back on themselves, like a Slinky, so even at six feet you don't have to shorten the hose. Cutting hoses often messes up the structure and then the alignment of the hose goes off, and each time you have to detach or reattach the hose it gets harder to manage.#3 The substantial plastic coating on this hose really protects the internal foil part, so that it doesn't get torn when installing or moving it around when you move the dryer to clean.#4 Substantial clamp rings, packaged (again with the packaging!) so that they were not squashed or bent in transit and they didn’t tear the hose.I have learned from my past dryer vent hose mistakes. No more rigid metal hoses that get squashed and if you have to size them down, create structural problems and razor sharp edges. No more paper thin foil or plastic hoses that are easily torn and don't have the larger, reinforced ends.I have no complaints. This is a fantastic dryer hose, and I was motivated to get online and write a review right after installing it, because I hate working on the dryer and this was so easy it wasn't even workIf the manufacturer wanted to make the product even better they might substitute the clamp rings for the type with the little turn- key built in (I took one off another unit) then you wouldn't even need the one tool (the screwdriver) that's required to tighten the clamp rings. And maybe they could offer white or grey as color options. But that’s just picking nits.Great product!

I run a small plant nursery and we use these ducts on our temperature control system. They work great and hold up well getting bumped and moved constantly so the quality is amazing. My only complaint, and its not specific to these ducts, is the fasters used to install them. I cannot believe there hasn't been something else invented that works better than these awful duct clamps. In fact, because we have to move lines so often in one greenhouse, we've replaced the clamps and use zip ties for efficiency.

This hose was exactly what I wanted; fairly sturdy, so I can run it out the window when I'm using my laser cutter.Nice that it comes with two clamps, and easily attaches to my blower.

Has nice solid "finished ends" that slide over the dryer exhaust much easier than the aluminum ones. Good for the $$ thanks

Hose works great, Easy to install and flexible

The flaw is that even with clamp screw tight as possible, the ducting easily pulled off bathroom ceiling fan exhaust port. So I used lots of aluminum duct tape instead. But didn’t buy ducting for the clamps anyway. I bought it for the flexibility. Difficult attic access/install from inside bathroom. Flexed ducting through fan box after taping to exhaust port. Then pulled with string through hole under outside eve. Took some planning. Point is,ducting is strong and flexible with flat ends that don’t tear or unravel. Very pleased. 😃

This heavy-duty dryer vent hose is a game-changer! Ditched the flimsy silver ones prone to tears for this sturdy replacement. Installation was a breeze, and its durability ensures worry-free use.

I only needed about 20" to connect a range vent that was slightly off centered. It came very compact so I was able to connect and use what I needed without the extra hose spilling out everywhere. The connection was a great fit, just large enough to go over the 6" vent pipe without a hassle. Clamped it tight with the hose clamps that came with it and the project was complete.

Easy to install and is much better than my other one (silver).

La calidad de las capas de la manguera hacen que sea muy adecuada para ventilación y aire acondicionado, el precio es adecuado contra la calidad,

It’s a very well made dryer hose,

Muy buena, se puede contraer de nuevo y volver a estirar, no se deforma.

Leei comentarios alternativos y este fue el que más me combecío en calidad y precio, aunque aun no lo eh instalado pero al tacto siento que si le falta mayor calidad...