Art3d 102-Piece Peel and Stick Backsplash Tile, Thick PVC Self Adhesive Subway Tile for Kitchen Bathroom, Fireplace, 3in. × 6in. Black

The pics before and about 1/3 of the way through. These tiles are great ! Easy to cut and apply. Not sure why others were saying they had tiles fall off cuz these are very sticky. They're not going anywhere. They have a white sticky foam pad on the back so I think maybe others pulled that off leaving only a black backing which is wrong. My backsplash is coming along very nice ! They are not all one shade. A lot of them are like a shade or two off which looks much better.

These look great in my kitchen! A good alternative to costly stone installation. Easy to wipe clean.

Photo: Stone-beige (review/comments below).Rust-slate: I was excited to cover the plain builder grade floor tile used around the gas fireplace. I was a little disappointed in the range of the color pattern over all of the tiles. The pictures are accurate but across the box they ran more dark brown than slate bronze and I wanted more of the slate color.They really stuck to the existing tile instantly and are completely unmovable once placed, so unlike a real tiling job, they need to be placed perfectly before pressed on. Had to take a few off through the course of the job and that required a chisel and hammer, destroying those tiles, then scraping/rubbing off remaining adhesive. Any slightly misplaced tile with tiny gaps are very noticeable - they need to be tight to look good. Cutting is easy - I used a utility blade box cutter to cut a line against a carpenter square ruler and break method which always resulted in a perfect edge, which worked perfectly even for curves. I tried using tin snips and the cut was not perfectly straight or exact. I recommend trying it out on an extra first.I'm happy with the end result. It looks great especially compared to previous plain builder grade floor tile around the fireplace. The only thing that would look better is actually demoing the tile and putting real slate tile on, which is labor intensive or expensive requiring full blown tile and mortar installation. This way, I still have that option. Another plus is if I get tired of this look at some point I can easily press on different 3x6 tiles.I took my time arranging the tiles and deciding on the best pattern for the overall look and laid it out first, which is worth the time. It's unique, looks great and worked perfectly for my project arrangement, style and dimensions.***Stone-beige: Could not do a separate review for separate stone beige order. Color was completely different than what is shown in ad. The tile is more yellow and there are no darker tiles with more contrast as shown. Returned them for refund. Adding photo of stone beige.

Since I have used the peel and stick sheets before, I ordered 4 boxes of this product thinking that I would need way more than I did. Each box of 102 tiles equals about 12.75 square feet and that is VERY accurate. These tiles were SO easy to use and way more forgiving than the sheets of tile I had used before. Once the first row was applied using a level to ensure straight lines, we had the entire backsplash done in about 4 hours. I would suggest taking all the tiles from the box and re-stacking them in a random pattern according to color variation. They cut easily with scissors and once you get the hang of applying the tiles tightly against one another, you can really accomplish quite a bit in a short time. The adhesive is powerful and you might need to use a putty knife to remove them if you don't get a tile set perfectly. We ended up using only 2 boxes and actually had 1 tile left over, even though we made mistakes on at least 3 of the tiles. Remarkably easy and we love the look. (Even though the light switches had not yet been added)

I learned quickly how to place them without messing up. Trying to remove them once placed is almost futile! Take the paper off at just one end, pull at an angle so the paper is seen from the front. Place the glue end of the block carefully up against the previous block, and pull the paper releasing the back to stick. Quick, easy and make sure you measure if you're working with outlets!!

Easy to install. Stick very good, too good. Easy to cut around the basebords with the right utility knife. Looks great. I ordered 102 + 4 singles for my fireplace and the little piece of floor in front of it, and I was short for about 9 pieces. Still need caulk in the borders.

I used them to redo an outdated accent piece in my bathroom and I just love the way it came out! Easy to use, thick & looks like real tile! No mess

These tiles are beautiful. They're super easy to use, incredibly easy to cut to size, and look great when they're done. However... The instructions say to put a tile on your surface and let it sit for a few days to judge whether or not it will stick. We did it on a clean, dry, wall, and followed all the instructions for the test piece. A few days later, we checked on our test piece, and that thing wasn't budging. So we got to work and did a whole wall. It looked beautiful! Until it didn't. Until we heard BANG BANG every 5 minutes with a new piece falling off the wall. Now we get to go back and glue EVERY single piece that we've already put on the wall. What's even worse, is that once you've had them on the wall without the glue, the start to bow a little bit as they're falling off. Which means if you try to stick the same piece back in, it may or may not fit the same. It's an INCREDIBLY frustrating process. HOWEVER, if you go in with some sort of glue in the first place (we're using spray on Gorilla Glue) I'm sure these tiles would be a much better rating. Save yourself some work, save yourself from having to buy MORE, and spend MORE money because they end up breaking or not fitting because they've fallen off. Use some glue, and you'll have a beautiful wall.

These tiles are very easy to install and look great. You do have to make sure you are working on a clean, smooth surface. After removing the old tiles, I scrapped, cleaned and sanded then painted a white base coat. (Direction stated that their don't stick well to drywall.)They are super sticky, and I had no problems cutting to fit various areas. I will finish with caulking around the edges and then put sealant on.I would definitely recommend this product.

I applied these to the bathroom wall of our RV. They look great and were easy to install. Easy to cut with an exacto knife.

Really amazing product. The tiles are really sticky. Make sure you have a plan before sticking them on the surface. Once on they are really hard to get off. So far I have no issues.There are some minor spaces in between the tiles that are visible. I caulked the corners, button of the tiles and to fill the spaces, I used a sealant. Which acted like a tile grout. The end result looks pretty good. Will see how well they do 1-2 years down the road.

It looks great, was easy to install, make sure walls are smooth, and you firmly press each other right together!Easy to clean, wish I know about the edging first!

This is actually one of the best Peel and stick products I’ve ever bought that stick is really strong so make sure you don’t need to remove while installing it because it might cause minor damage to the wall, but it does what it should and it looks exactly like the pictures I will most likely order another box!