Auto Dynasty Halogen Model Headlights Assembly Compatible with Ford F250 F350 F450 F550 Super Duty 2005 2006 2007, Driver and Passenger Side, Black Housing Clear Lens

Nice lights, however if you are putting these into a 1999-2004 Super Duty to update the looks you will need the headlight bulbs and sockets along with the adapter pigtails to make them work. These take the 9008 bulbs vs the 9007 bulbs that came in the early Super Dutys. Some other higher priced lights come fully loaded with bulbs and sockets, these DO NOT. You get what you pay for, but if you are putting these into a 2005-2007 you will already have everything you need. Great looking lights however.

I bought these for my 05 f250 Kingranch. Site says that it will fit. So I ordered the headlights and 4 day later I'm installing them. Then I found out that the blinker socket does not mach the stock headlight. After contacting seller about the situation, they were very helpful to take care of me. I decided to keep product and fabricate my blinkered socket. After grinding one of the two small knubs down and making the largest knub half the size , it worked like a charm. Socket still makes a good seal to keep the water out.

Great look on my 04 f350 which ihad to chop a lot just to get it to fit since i had the three piece headlight assembly still. Only bad part is that now after a few months the bulb reflector broke off and when i first bought it these guys leave so much gap for water to get in the lights so it was real annoying having to go and seal it myself but looks great

2006 F350 4x4 - Was a little hesitant about ordering these because I didn't want them to be to dark for night driving. These are "smoked" to perfection 👌 and they fit perfectly without a problem. Update-- Ordered and installed Sealight led # H13/9008 and sealed the deal with these headlight assemblies.

Installed on my 2005 Ford F350. Fit perfectly and easy to install. Impressive light with the LED lamps I used.

Perfect installation and great looks. The smoke tint works just right for using LED lamps, too. Bright, but not too bright to blind oncoming traffic. Still able to get a clear view at night at twice the range as with regular incandescent or HID lamps.Also, I didn't need to "modify" it to install on my 2005 F-250 Super Duty either.

Went in easy, look great! But, light up the guard rail on passenger side other lane on driver's side really well, road not so much.... As you probably know, f350 lights do not have horizontal light adjustment. Had to shim light on one side with washers, creating a large gap between light and fender, sand mounting area on the other to get them close.

The issue I had with these lights is the bulb opening is cut too big. This results in my bulbs not seating all the way and they wiggle in their place. I have to use RTV to keep the bulb from wiggling, even possibly coming out because of how loose it is. Other than the bulb holes being cut too big, the lights look great. These aren’t a total waste of money, just make sure you have some RTV to keep the bulbs from falling/wiggling out of the headlights.