🚗 Upgrade Your Visibility with Confidence!
The OTUAYAUTO Front Windshield Washer Nozzles are a reliable replacement for various Dodge, Jeep, and Chrysler models, ensuring optimal performance with easy installation. Made from premium materials, this 2-piece kit meets OEM specifications and comes with a 60-day return policy and a 12-month warranty for worry-free shopping.
Manufacturer | OTUAYAUTO |
Brand | OTUAYAUTO |
Item Weight | 0.317 ounces |
Package Dimensions | 3.9 x 3.5 x 0.55 inches |
Country of Origin | China |
Item model number | QWJ032-2 |
Is Discontinued By Manufacturer | No |
Exterior | Plastic,Rubber |
Manufacturer Part Number | QWJ032-2 |
OEM Part Number | 5116079AA, 4805742AB, 5113049AA, 5303833AA, 55077460AA, 5160308AA, 4805742AC, 68024312AB |
G**0
Work flawlessly on 2019 Toyota Highlander SE
Just as advertised, swapped out the original 3 way valve with this. It is now properly functioning. Spraying evenly on both nozzles.***Previous issue and problem is that the driver worked accordingly but was intermittent on the passenger side.
N**.
Finally got to see again
Easy to install
F**T
Easy install, works alright
Shoots some over the roof, but they work and the windshield gets plenty splattered on a 2008 Jeep Liberty. I bought these because I just picked up a used '08 Jeep Liberty and I've been fixing all kinds of small dumb things on it. The originals, the lines had busted off at the ends. Use a pair of pliers to squeeze and pop your old busted ones out from the bottom under the hood. These just pop right in. Don't forget to pop the little rubber gasket on them first to make a seal between the hood and the nozzles. Wouldn't think it, but I did not do this and some fluid will leak out the bottom of these otherwise. Luckily, if you gently squeeze the prongs from under the hood you can get these back out without breaking them so you can put the rubber gasket in there and keep them from leaking all over your hood too. It did not come with any replacement L brackets to hook the lines back into, as I had the brittle broke off pieces of my old ones still stuck in them. But as I re-used most of my old rubber lines, it does come with some connectors and I just snipped off extra bits of the included rubber hose and the plastic connectors it does come with to supplement it, and made it work. So overall, glad to have a clean window again on command and I'm quite happy for how cheap this was.
B**K
good value
perfect fit on 2013 jk
A**W
Does not last more than a month, junk. Repeat, junk.
These come two to a pack, ordered and installed one. A few days ago, the washers quit working. By the time I got the second one in a few days later and determined that it fixed the same problem the first one did, the return period had closed or I would return these two. I'm just going to have to order a good one from either the factory or somebody who takes a factory piece and sticks it in their package. These certainly aren't close to factory, The factory one lasted 11 years. To say I'm dissatisfied would be an understatement, I feel ripped off. I may go ahead and complain to Amazon anyway.
R**H
Better than the first set but not as good as the original
I attempted to remove the washer nozzles from my hood but because they were 14 years old the plastic had become very brittle and they just crumbled in my hand. I purchased a set from Rockauto but they did a better job of washing my hood than the window so I purchased this set from Amazon. The first thing I noticed about this set was that it included two thin rubber gaskets that fit between the nozzles and hood which I surmise is intended to protect the paint. These were provided with the original nozzles from GM but not with the first replacement nozzles. I also noticed that these nozzles were intended to be adjusted both horizontally and vertically using a pin or the end of a paper clip. This also was something that the first replacement pair lacked. At this point I was convinced that these nozzles were going to work much better than the first set and equally as well as the originals. Unfortunately, this was not to be. Yes they did work better than the first set but still not as well as what was originally on the car. Rather than producing something more of a "fan" spray the fluid came out in a concentrated stream and still lower than hoped. I attempted to adjust them as instructed but I was only able to get them to move from side to side and not up or down. At this point I have no intention of wasting another $10 on nozzles so I'll just use these as they do what they need to do although not as well as I’d like.
J**N
It worked great
Fixed my issue on Toyota Highlander and I have a spare.5 minute job and my sprayer now works
H**Y
Fixed our problem, washers working!
While this item did not come with any instructions, there were plenty of parts/options. The replacement actually took less than 5 or 10 minutes and washers working perfectly on our 2012 Jeep Liberty.
D**L
Works great
Fits my Dodge Journey and they spray perfectly
M**.
Buen artículo
Misma calidad que el original ....muy bueno
R**N
Funcionaron bien
Fáciles de instalar.
P**P
Pura basura
Este producto salió peor del parte que estaba intentando de reemplazar
M**N
Funcionan perfecto
Que son funcionales como los originales
Trustpilot
1 month ago
2 months ago